|
With the development of society and the continuous improvement of people's material life, latex mattress fire is not feasible, and the price varies from several thousand yuan to tens of thousands of yuan. You're not mistaken. You're selling a mattress for tens of thousands of dollars.
We first summarized the advantages of latex mattress: high elasticity, can meet the needs of people of different weight, its good support ability can adapt to the various postures of sleepers; latex mattress contact area is much higher than ordinary mattress, can average disperse the bearing capacity of human body weight, has the function of correcting bad sleeping posture, and has sterilization function; latex mattress has no noise, No. Vibration, effectively improve the quality of sleep, good air permeability. With these advantages alone, it will not be so expensive to sell.
Where on earth is it expensive? Today I'll introduce you to the manufacturing process of latex mattress and start to roll it up.~
Raw materials for production
Natural rubber is collected by artificial tapping. Every tree can produce only 300 ml of rubber per day, and all of them are artificially harvested, which seems to be very precious.
Collect the rubber latex and send it to the factory.
Mixed ingredients:
According to the characteristics of different products, some mattresses will be produced by adding some rubber, while some mattresses choose to use all natural rubber, so there is a price range from tens of thousands to tens of thousands. Then add curing agent, gelling agent, antioxidant and other additives, fully mix and fill soap and air at the same time, the more air, the more loose and soft the product.
In this way, the mattress material is mixed.
Mattress forming
The latex foam is stirred into a mold through a hose. The die is a special aluminium die with about 20,000 needles on each die cover and chassis. The advantages of this kind of needle are: first, to better heat conduction into the center of the material block; second, to form a needle hole on the mattress which is conducive to the formation of drying in the later stage of the process. After filling, the compound in the die is cemented under the action of cementitious agent, and gradually coagulates into blocks. Curing treatment
The mould is fed into a steam chamber with a temperature of 110 degrees Celsius through a conveyor belt, and vulcanization occurs under the action of hot steam. After coming out of the hot steam chamber, open the die cover, then take the mattress out of the die, and then rinse and dry, as well as brand label stamping and other processes. The function of vulcanization: vulcanization brings uniform distribution of micro-holes in latex mattress, reduces the mugginess of neck and head during sleep, has good elasticity and support, and emits fragrance to enhance customer experience and satisfaction. Finally, through product testing, it is determined that it meets the standard before it can be packaged out of the factory. Wait a minute... Siebeizi has something to say.
Looked at the whole latex mattress manufacturing, whether it feels worthwhile. Many people should know how to test pure cotton fabrics, then how to identify pure latex production of latex products, so that they will not be deceived. Identification: 1. Look: Natural latex has thousands of honeycomb stomata, which can hold more air than other fibers. The color of natural latex is light yellow or reddish orange. The color of snow-white is usually treated with other chemical ingredients, not natural latex.
2. Touch: Feel comfortable, as tender as baby's skin; Sweat hands contact natural latex will make the latex yellowing, which is a normal phenomenon. Pressure: The natural latex bedding will rebound quickly and return to its original state when pressed by hand.
3. Pull: Good natural latex has excellent toughness, porous and fine texture, gentle pull is not easy to break. In fact, latex is derived from the sap of rubber trees, they are extremely precious, because each rubber tree can produce only 30 CC latex every day. A latex product takes at least one to one and a half days to complete the production, is a very time-consuming and valuable material product. Of course, the cost is still relatively high, so it is certainly not the real thing that is too cheap. Consumers must remember not to buy inferior products because of greed and cheapness... In addition, when cleaning, it can be washed with water and must be hand-washed. It can not be washed in washing machine or other machine equipment, because it will wring. When hand washing, extrude as much as possible.
|
